ISO PACK 2000
The World Leading ISO PACK offshore cryogenic tank is the product of choice for well service companies all around the World. Designed to be transported either individually or in pairs (coupled together) as one 20ft ISO unit, this configuration allows for the tanks to be shipped on standard container ships anywhere in the world, by the most economical method.
The general arrangement 10ft ISO tank can be produced with working pressures ranging from 3.0 Bar to 24 Bar .
The ISO PACK also features high vacuum super-insulation, stacking capability 9 units high to ISO 1496-3 (192,000 kg max), full set of decals (including logos where supplied by customer), integral pressure building system and various pipe work and valve options to offer maximum versatility to end user and operator.
Special features include:
- Lower roof plate to allow stacking with slings/shackles remaining in situ
- Dual try-cock valves
- Fully welded frame or optional removable frame
- Optional Hasting vacuum check valve
|
ISO PACK 2000 With Optional Offset Frame |
|
ISO PACK 2000 With Optional Low Height Frame (NOTE! Change to full certification necessary for this version) |
| Specification | ISO PACK 2000 6.0 Bar ASME | ISO PACK 2000 17 Bar | ISO PACK 2000 24 Bar |
| Product Code | 9950-0007 | 9950-0100 | 9950-0200 |
| Capacity (Ltr) Gross | 7,901 | 7,602 | 7,371 |
| Pressure | 6.0 Bar | 17 Bar | 24 Bar |
| Tare Weight kg | 5,370 | 6,167 | 7,219 |
| Max Gross Weight (LN2) kg | 11,435 | 12,000 | 12,876 |
| Holding Time (Days) | 25* | 46 | 56 |
| Materials / Specifications | |
| Inner Shell |
Stainless Steel |
| Outer Jacket | Carbon Steel |
| Skid | Carbon Steel |
| Pipe Work |
Tp.316 Stainless Steel Sch. 10 Optional: Norsok specification |
| Paint Specification |
Shot Blast SA 2.5, Zinc Rich Primer 50 microns, Epoxy High Build 125 microns, Polyurethane Top Coat 50 microns Standard Colour : White Custom Paint Colours on Request Optional: Norsok Paint M501 |
| Design Approval(s)** |
EN 13530, ADR/RID, IMDG, IMO, UKDOT, DNV 2.7-1 / EN 12079, CSC, USDOT, ASME VIII, AS 1210 |
| Performance |
Maximum Evaporation Rate 0.4% per day |
| Temperature |
Inner Shell -196°C to +50°C, Outer Jacket -20°C to +50°C (Option -40°C to +50°C) material |
| Corner Castings |
ISO Standard 1161 Blair BLRC20100 / 20000 |
| Couplings |
NIT150 as standard. Customer specifications on request |
| Roof Plates |
Aluminium (Optional Carbon Steel Durbar) |
| Drip Tray |
Stainless Steel |
| Earth Point |
Stainless Steel M12 Boss |
| Vaporiser |
Stainless Steel Finned Tubing |
| Slings (Optional) |
Slings and shackles (where supplied) Approved to all relevant codes, including DNV 2.7-1 |
| Insulation |
Vacuum + Superinsulation |
* Holding time in accordance with EN12213
** Design approvals may vary depending on options and country of operation. For details, please contact Technical Department.
|
Dimensions |
Length (mm) | Width (mm) | Height (mm) |
|
2,991 |
2,438 |
2,591 |
|
|
Dimensions of 2 x Locked Units for shipping purposes whilst empty) |
6,058 | 2,438 |
2,591 |
| V1 |
Liquid Isolation |
| V2 |
Pump Return or Top Fill |
| V3 |
Trycock Vent 95% |
| V4 |
Gas Vent Valve |
| V5 |
Travelling Valve |
| V6 |
Pressure Build |
| V7 / V8 / V9 |
Gauge Panel Control Valves |
| V10 |
Rear Liquid Fill (Option 1) |
| V11 |
Line Blow Down |
| V12 |
Line Blow Down |
| V13 |
Line Blow Down (Option 1) |
| V14 |
Liquid Decant / Fill |
| V15 |
Secondary Trycock |
| V16 |
Line Blow Down |
| V17 |
Vaporiser Isolation Valve |
| VC1 |
Vacuum Pumping Port |
| RV1 |
Primary Relief Valve |
| RV2 |
Secondary Relief Valve |
| RV5 |
Travelling Relief Valve |
| RV6 |
Line Relief Valve |
| RV7 |
Line Relief Valve |
| DP |
Differential Pressure Contents Gauge |
| PG |
Pressure Gauge |
| F1 |
Liquid Strainer |
| NRV1, NVR2 |
Non Return Valve |
| Couplings C1,C2,C3 |
To Customers Requirements |
| PBV |
Pressure Build Vaporiser |
Tank schematic shows standard configuration, utilising Herose Globe Valves.
Options:-
Option 1: Rear Fill direct to rear of tank allowing concurrent bottom fill / liquid decant (this is default version of ISO PACK tanks but can be removed on request).
Option 2: Rear Fill external to tank via main Tank Isolation Valve.
Option 3: Any of the above arrangements with Meca Inox Cryogenic Ball Valves as alternative to Herose Globe Valves.